LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Steering Wheel Replacement >> Installation Procedure

Installation Procedure

  1. Install the steering wheel to the steering column, observing the alignment marks.
    Fig 1: Installing Steering Wheel
    G01419185Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE .
  2. Install a new steering wheel set nut.

    Tighten 

    Tighten the nut to 41 N.m (30 lb ft).

  3. Remove J 42640  from the steering column.
  4. Connect the horn electrical connector.
  5. Install the steering wheel inflator module. Refer to AIR BAG MODULES .
scientia non olet · About LEMON Manuals