LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Electrical >> Body Electrical >> Battery >> Repair Instructions >> Battery Heat Shield Replacement >> Removal Procedure

Removal Procedure

  1. Remove the push-in retainer attaching the air inlet screen and battery heat shield to the plenum panel.
    Fig 1: Removing Battery Heat Shield From Plenum
    G01971915Courtesy of GENERAL MOTORS CORP.
  2. Remove the push-in retainer attaching the battery heat shield to the wheelhouse panel.
  3. Lift the battery heat shield from the ground stud and remove the shield.
    Fig 2: Removing Battery Heat Shield From Wheelhouse Panel
    G01971916Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals