LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Chevy Express H2500 >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Repair Instructions >> Cruise Control Cable Replacement >> Removal Procedure

Removal Procedure

  1. Open the hood
  2. Remove the air cleaner assembly.
    Fig 1: Identifying Cruise Control Cable Connector Screw End
    G02422748Courtesy of GENERAL MOTORS CORP.
  3. Remove the cruise control cable end from the throttle linkage.

    Use a suitable tool to lightly pry off the end of the cruise control cable end from the throttle linkage.

    Fig 2: Removing Cruise Control Cable End From Throttle Linkage
    G02422749Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the cruise control cable from the cable bracket by squeezing the retaining tabs on the cable.
  5. Disconnect the cruise cable from the retaining clip on the fan shroud.
    Fig 3: Disconnecting Cruise Control Cable From Cable Bracket
    G02422750Courtesy of GENERAL MOTORS CORP.
  6. Squeeze the retaining tabs on the cruise control cable fitting to expose the cable bead and the buckle of the ribbon.

    Important:  Do not allow the cruise control ribbon to retract into the module assembly.

  7. Disconnect the cruise control cable from the cruise control module.
  8. Disconnect the cruise control cable bead from the buckle on the end of the ribbon.
  9. Remove the cruise control cable from the vehicle.
    Fig 4: Disconnecting Cruise Control Cable From Module
    G02422751Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals