LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Venture Value >> Repair and Diagnosis >> External Pages >> Different car >> Section 584 (Charging System) >> Removal & Installation >> Generator >> Removal

Removal & Installation: Generator: Removal

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable.
  2. Remove drive belt from generator.
  3. Place coolant recovery reservoir aside for access.
  4. Remove bolts (1, 2, 3) from generator. See Fig 1 .
  5. Disconnect electrical connector from generator.
  6. Remove protective boot from generator output BAT terminal.
  7. Remove generator output BAT terminal nut and remove positive battery lead from generator.
  8. Remove generator.
Fig 1: Removing Generator (3.1L)
G00060590Courtesy of GENERAL MOTORS CORP.