LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Venture Value >> Repair and Diagnosis >> External Pages >> Different car >> Section 1370 (Lighting Systems) >> Repair Instructions >> License Lamp Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press the bulb into the license lamp socket.
  2. Install the license lamp lens to the liftgate.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the screws to the license lamp lens.

    Tighten 

    Tighten the screws to 2 N.m (18 lb in).

    Fig 1: Installing License Lamp Bulb And License Lamp Lens To License Lamp
    G01534116Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals