LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Venture Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Automatic Transaxle -- 4T65-E - Service & Repair) >> Repair Instructions >> Torque Converter Cover Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Install the torque converter cover.
    NOTE: Refer to FASTENER NOTICE
  2. Install the torque converter cover bolts.

    Tighten 

    Tighten the bolts to 10 N.m (89 lb in).

  3. Lower the vehicle.
    Fig 1: Installing Torque Converter Cover & Bolts
    G01812647Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals