LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Venture Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 607 (Rear Suspension System) >> Repair Instructions >> Rear Axle Lower Control Arm Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Tools Required 
  • J 24319-B Universal Steering Linkage Puller
  1. Remove the rear support. Refer to SUPPORT REPLACEMENT .
  2. Remove the stabilizer shaft link. Refer to STABILIZER SHAFT LINK REPLACEMENT .
  3. Remove the adjustment link retaining nut from the lower control arm. See Fig 1.
  4. Using J 24319-B separate the adjustment link from the lower control arm. See Fig 2. Remove the wheel bearing and hub from the lower control arm. Refer to WHEEL BEARING/HUB REPLACEMENT - REAR .
  5. Remove the lower control arm mounting bolts and nuts. See Fig 3.
  6. Remove the lower control arm.
Fig 1: Removing Adjustment Link Retaining Nut
G00355572Courtesy of GENERAL MOTORS CORP.
Fig 2: Using J 24319-B Universal Steering Linkage Puller
G00355570Courtesy of GENERAL MOTORS CORP.
Fig 3: Removing Lower Control Arm
G00355563Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals