Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.

Connect the antenna lead to the antenna base.
Run the antenna lead through the fender hole
Align the lead with the antenna base.
NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
Tighten the locking nut and fasten the antenna base to the fender.
Tighten

Tighten the nut to 5 N.m (44 lb in).

Fig 1: Connecting Antenna Lead To Antenna Base
Courtesy of GENERAL MOTORS CORP.