Radio Setup: Notes
WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
When replacing a DE 100 series radio, two procedures have to be completed with the scan tool to properly configure the replacement radio to the vehicle. With the key in the ON position, use a scan tool to perform the New Vin procedure and the Radio Setup procedure to set up communications between the radio and the vehicle.
- At the Menu screen, select Diagnostics.
- At the Vehicle identification screen, select the following options:
- Model Year
- LD Trk, MPV, Incomplete
- At the System Selection Menu screen, select Body.
- At the Vehicle Identification screen, select U or X (Platform type).
- At the Body screen, select Radio.
- At the Radio screen, select Special Functions.
- At the Special Functions screen, select Radio Setup.
- Select the appropriate radio. Uplevel Radio is anything other than the Base AM/FM Radio.
Important: The Radio Setup option does not contain a submenu. Radio Setup will configure the following systems:
- Steering wheel controls
- Learn VIN
- DTCs
- Class 2 radio messages
After the completion of the Radio Setup procedure, return to the Special Functions screen and select the New Vin procedure and continue.