LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Venture Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 1362 (Transfer Case - STEYR) >> Repair Instructions >> Speed Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to JACKING AND LIFTING in General Information.
  2. Disconnect the electrical connector from the speed sensor.
  3. Remove the speed sensor vent hose bolt (3) from the transfer case.
  4. Reposition the pinion housing vent hose (2) and mounting bracket away from the speed sensor bolt boss.
    Fig 1: Removing Speed Sensor Vent Hose Bolt From Transfer Case
    G01485204Courtesy of GENERAL MOTORS CORP.
  5. Remove the speed sensor (1).
  6. Remove O-ring from the speed sensor, if necessary. The O-ring may be reused if it is not cut or damaged.
    Fig 2: Removing Speed Sensor
    G01485205Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals