LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Venture Plus >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Water Pump Replacement >> Installation Procedure

Installation Procedure

  1. Install the water pump gasket.
  2. Install the water pump.
    NOTE: Refer to FASTENER NOTICE .
  3. Install the water pump bolts.

    Tighten 

    Tighten the bolts to 10 N.m (89 lb in).

    Fig 1: Installing Water Pump, Gasket & Bolts
    G01829216Courtesy of GENERAL MOTORS CORP.
  4. Install the water pump pulley. Loosely install the mounting bolts.
  5. Install the drive belt. Refer to DRIVE BELT REPLACEMENT .
  6. Install the water pump pulley bolts.

    Tighten 

    Tighten the bolts to 25 N.m (18 lb ft).

    Fig 2: Installing Water Pump Pulley Bolts
    G01829217Courtesy of GENERAL MOTORS CORP.
  7. Install the drive belt guard.
  8. Fill the cooling system. Refer to Draining and Filling Cooling System .
  9. Inspect the cooling system for leaks.
    Fig 3: Installing Drive Belt, Drive Belt Guard & Bolts
    G01829218Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals