LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Venture Plus >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Repair Instructions >> Seat Switch Replacement - Power >> Installation Procedure

Installation Procedure

  1. Connect the adjuster switch electrical connector.
  2. Install the adjuster switch to the finish cover.
  3. Install the finish cover to the seat adjuster.
    NOTE: Refer to FASTENER NOTICE .
  4. Install the finish cover screws.

    Tighten 

    Tighten the screws to 2 N.m (18 lb in).

  5. Connect the front seat pretensioner electrical connector.
  6. Connect the front seat SIR module electrical connector.
    Fig 1: Installing Finish Covers To Front Seat Frame
    G01814298Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals