Fastener Tightening Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Door Jamb Switch Screw | 6 N.m | 53 lb in |
| Electrical Center Mounting Bolt/Screw | 2 N.m | 18 lb in |
| Fender Upper Edge Screws | 11 N.m | 97 lb in |
| Front Fender Liner Rear Bottom Bolts | 2 N.m | 18 lb in |
| Front Fender Liner to Front Bumper Fascia Bolts | 2 N.m | 18 lb in |
| Fender Splash Shield Screws | 2 N.m | 18 lb in |
| Fender to Front Bumper Fascia Bolts | 11 N.m | 97 lb in |
| Fender to Rear Edge Bolts | 11 N.m | 97 lb in |
| Front End Sheet Metal Diagonal Brace at Upper Tie Bar Bolts | 25 N.m | 18 lb ft |
| Front End Sheet Metal Diagonal Brace at Wheelhouse Bolt | 47 N.m | 34 lb ft |
| Grille Screws | 4 N.m | 35 lb in |
| Hood Hinge to Hood Bolts | 25 N.m | 18 lb ft |
| Hood Hinge to Upper Fender Rail Bolts | 25 N.m | 18 lb ft |
| Hood Latch (Primary) at Support Bolts | 25 N.m | 18 lb ft |
| Hood Latch (Primary) Bolts | 25 N.m | 18 lb ft |
| Hood Prop Rod Base Bolts | 10 N.m | 89 lb in |
| Hood Scoop Screws | 6 N.m | 53 lb in |
| Latch (Secondary) to Hood Bolts | 25 N.m | 18 lb ft |