Removal Procedure

Fig 1: Removing Front Wheel Speed Jumper Harness & Left Engine Splash Shield

Courtesy of GENERAL MOTORS CORP.

Use J 38778 in order to remove the push-in retainers from the engine compartment side rail.
Use J 38778 in order to remove the push-in retainers from the front fender liner at the engine splash shield.
Remove the front wheel speed jumper harness from the left engine splash shield. Refer to WHEEL SPEED SENSOR REPLACEMENT -- FRONT .
Remove the front wheel speed jumper harness from the right engine splash shield. Refer to WHEEL SPEED SENSOR REPLACEMENT -- FRONT .

Fig 2: Removing Front Wheel Speed Jumper Harness & Right Engine Splash Shield
Courtesy of GENERAL MOTORS CORP.
Remove the engine splash from the vehicle.