Installation Procedure

Fig 1: Installing Front Wheel Speed Jumper Harness & Left Engine Splash Shield

Courtesy of GENERAL MOTORS CORP.

Important:  The battery cable and the ABS harness must be installed to the engine splash shield prior to installation of the engine splash shield to the body.

1. Install the front wheel speed jumper harness to the left engine splash shield. Refer to WHEEL SPEED SENSOR REPLACEMENT -- FRONT .
2. Install the front wheel speed jumper harness to the right engine splash shield. Refer to WHEEL SPEED SENSOR REPLACEMENT -- FRONT .
   Fig 2: Installing Front Wheel Speed Jumper Harness & Right Engine Splash Shield

   Courtesy of GENERAL MOTORS CORP.
3. Align the engine splash shield to the vehicle engine compartment side rail
4. Install the push-in retainers to the engine compartment side rail.
5. Install the push-in retainers to the front fender liner at the engine splash shield.