LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Venture Plus >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Front End >> Repair Instructions >> Hood Replacement >> Installation Procedure

Installation Procedure

Fig 1: Installing Hood & Hood Hinges
G01813814Courtesy of GENERAL MOTORS CORP.
  1. Install the hood to the hood hinges with an assistant.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the hood bolts to each side of the hood at the hinge.

    Tighten 

    Tighten the bolts to 25 N.m (18 lb in).

  3. Remove the protective coverings from the adjacent body panels.
  4. Align the hood, if required. Refer to Hood Adjustment .
scientia non olet · About LEMON Manuals