Installation Procedure

WARNING: This page is about a different car, the 2002 Cadillac Eldorado. However, it is still accessible from the selected car via links, so may be relevant.

Install the new bulb (2) into the lamp socket (1).
Firmly hold the lamp socket (1).
Push inward while turning the bulb (2) clockwise in order to secure the bulb to the socket.

Fig 1: Stop Lamp Socket & Bulb
Courtesy of GENERAL MOTORS CORP.
Install the stop lamp sockets (3) to the housing (1).
Turn the sockets clockwise 45 degrees in order to secure.
Slide the high-mounted stop lamp carpeted trim cover rearward in order to engage the retainer clips to the rear shelf panel.

Fig 2: High Mounted Stop Lamp & Components
Courtesy of GENERAL MOTORS CORP.