LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Steering >> Steering Wheel & Steering Column >> Repair Instructions >> Ignition Switch Replacement - On Vehicle >> Installation Procedure

Installation Procedure

  1. Install the ignition switch. Refer to IGNITION AND KEY ALARM SWITCH ASSEMBLY - ASSEMBLE - Off Vehicle .
  2. Install the ignition lock cylinder. Refer to IGNITION LOCK CYLINDER REPLACEMENT - On Vehicle (Cylinder Rotates)  or IGNITION LOCK CYLINDER REPLACEMENT - On Vehicle (Unable To Rotate Cylinder) .
  3. Install the steering column shrouds. Refer to STEERING COLUMN TRIM COVERS - Assemble - Off Vehicle .
  4. Connect the steering column electrical connector to the vehicle.
  5. Install the left side closeout insulator panel. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - LEFT .
  6. Connect the battery negative cable to the battery. Refer to BATTERY NEGATIVE CABLE DISCONNECT/CONNECT PRO .
  7. Enable the SIR system. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM .
scientia non olet · About LEMON Manuals