LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Transfer Case - STEYR - Service) >> Repair Instructions >> Vent Hose Assembly Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Install the vent hose to the extension housing assembly vent tube.
  2. Connect the vent hose (2) to the retaining bracket on the transfer case assembly.
  3. Install the vent hose clamp (1) to the extension housing assembly.
  4. Lower the vehicle.
    Fig 1: Installing Vent Hose & Clamp
    G01827381Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals