LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Transfer Case - STEYR - Service) >> Repair Instructions >> Support Brace Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Install the transfer case brace.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the transfer case brace bolts.

    Tighten 

    Tighten the bolts to 47 N.m 35 lb ft).

  3. Lower the vehicle.
    Fig 1: Installing Transfer Case Brace & Bolts
    G01827383Courtesy of GENERAL MOTORS CORP.