LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Shift Interlock Systems) >> Removal & Installation >> Shift Interlock Solenoid >> Removal

Shift Interlock Solenoid: Removal

WARNING: This page is about a different car, the 2002 Cadillac Eldorado and 2001 Cadillac Eldorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Block the wheels on the vehicle. Place the shifter in the NEUTRAL position. Remove the shifter handle retaining clip. See Figure . Remove the shifter handle by pulling it up.
  2. Using a flat-bladed tool, carefully disengage the console trim plate retaining clips from the console. See Figure .
  3. Partially remove the trim plate (2). Disconnect the electrical connectors. See Figure . Remove the trim plate.
  4. Unsnap the shift cable terminal from the shifter pin. See Figure . Disconnect the automatic transmission shift lock actuator solenoid wire harness connector. Remove the shifter fasteners.
  5. Remove the shifter assembly. See Figure . Disconnect the automatic transmission shift lock actuator (1) from the shifter assembly. See Figure .
scientia non olet · About LEMON Manuals