LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Keyless Entry System >> Repair Instructions >> Remote Control Door Lock Receiver Replacement >> Removal Procedure

Removal Procedure

  1. Remove the instrument panel (IP) upper trim. Refer to TRIM PAD REPLACEMENT - IP UPPER .
  2. Disengage the retaining tabs in order to remove the door lock receiver from the IP upper trim.
  3. Disconnect the electrical connector from the door lock receiver.
scientia non olet · About LEMON Manuals