LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Tracker 2D Utility, RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 213 (Engine Controls - Basic Diagnostic Procedures) >> Ignition Systems >> Electronic Ignition System >> Test Description

Test Description

WARNING: This page is about a different car, the 2003 Chevrolet Tracker. However, it is still accessible from the selected car via links, so may be relevant.

The numbers below refer to the step numbers in the diagnostic procedure.

  1. 2

    Cranking engine for 10 seconds allows CMP sensor diagnostic to run. If there is a fault in CMP sensor circuit, ignition system can malfunction. Repair cause of a DTC P0340 first.

  2. 5

    This step checks for a condition that can cause a loss of spark, even though results in step  3 indicated that there was good spark.

  3. 13

    This step checks whether engine will start and run. A repair that has been performed leading to this step may only have been a contributing cause of a no-start condition. Returning to NO-START - ENGINE CRANKS OKAY (2.0L)  or NO-START - ENGINE CRANKS OKAY (2.5L)  under NO-START DIAGNOSIS, will locate additional causes of a no-start condition.

scientia non olet · About LEMON Manuals