LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Tracker 2D Utility, RWD, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Repair Instructions >> Cruise Control Cable Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Installing Cruise Control Servo Cable To Accelerator Pedal
    GM488525Courtesy of GENERAL MOTORS CORP.
  1. Install the cruise control servo cable to the vehicle. Secure the cable with the retainer (2) and the grommet (4).
  2. Install the cruise control servo cable to the accelerator pedal (1).
    3. Fig 2: Installing Cruise Control Servo Cable To Retainers
    GM488527Courtesy of GENERAL MOTORS CORP.
  3. Install the cruise control servo cable (3) to the cruise control servo cable retainers (5).
    4. Fig 3: Installing Cruise Control Servo Cable
    GM488533Courtesy of GENERAL MOTORS CORP.
  4. Install the cruise control servo cable (3) to the cruise control servo assembly (1).
  5. Adjust the cruise control servo cable locknut (5) in order to adjust the cruise control cable play.
    6. NOTE: Refer to FASTENER NOTICE .
  6. Adjust the cruise control servo cable play to 1-2 mm (0.04-0.08 in) at the servo closed throttle position.

    Tighten:  Tighten the cruise control servo cable locknut to 5 N.m (44 lb in).

    7. Fig 4: Installing Cruise Control Module Cover
    GM488523Courtesy of GENERAL MOTORS CORP.
  7. Install the cruise control module cover (1).
scientia non olet · About LEMON Manuals