LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Tracker 2D Utility, 4WD, Automatic >> Repair and Diagnosis >> Body & Frame >> Windows >> Stationary Window System >> Repair Instructions >> Rear Window Defogger Switch Replacement >> Removal Procedure

Removal Procedure

  1. Remove the IP cluster trim plate. Refer to TRIM PLATE BEZEL REPLACEMENT - INSTRUMENT PANEL (I/P) CLUSTER .
  2. Using a taped flat bladed tool, gently pry the rear window defogger switch (1) from the instrument panel.
  3. Disconnect the rear window defogger switch electrical connector (2).
    4. Fig 1: Disconnecting Rear Window Defogger Switch Connector
    GM477547Courtesy of GENERAL MOTORS CORP.
  4. Remove the switch (1) from the vehicle.
scientia non olet · About LEMON Manuals