LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Tracker 2D Utility, 4WD, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System >> Repair Instructions >> Transmitter Battery Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Installing Battery
    GM493936Courtesy of GENERAL MOTORS CORP.
  1. Install the new battery (2) with the positive (+) side facing up.
  2. Inspect that the seal (4) is properly positioned.
  3. Snap the two halves together.
    4. Fig 2: Snapping Transmitter Together
    GM493929Courtesy of GENERAL MOTORS CORP.
  4. Verify that the remote control door lock receiver transmitter (3) is functioning correctly. If not, refer to Transmitter Programming (Second Method)  .
scientia non olet · About LEMON Manuals