LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Floor Panel Heat Shield Replacement >> Installation Procedure

Installation Procedure

  1. If vehicle is a sport utility vehicle, install the exhaust heat shield to the studs.
  2. Install the exhaust heat shield nuts. Tighten the exhaust heat shield nuts to 9N.m (80 lb in).
  3. If vehicle is a crew cab pick-up truck, install the exhaust heat shield(s) to the studs.
  4. Install the exhaust heat shield nuts. Tighten the exhaust heat shield nuts to 9 N.m (80 lb in).
  5. If vehicle is a extended cab pick-up truck, install the exhaust heat shield (1, 2) to the studs.
  6. Install the exhaust heat shield nuts. Tighten the exhaust heat shield nuts to 9 N.m (80 lb in).
  7. If vehicle is a regular cab pick-up truck, install the exhaust front heat shield (1) and/or the exhaust heat shield (2) to the studs.
  8. Install the exhaust heat shield nuts. Tighten the exhaust heat shield nuts to 9 N.m (80 lb in).
  9. Install the exhaust front heat shield to the studs.
  10. install the exhaust front heat shield nuts. Tighten the exhaust heat shield nuts to 9 N.m (80 lb in).
  11. Install the catalytic converter, if necessary. Refer to Catalytic Converter Replacement (4.3L, 4.8L & 5.3L Engines)  or Catalytic Converter Replacement (6.0L & 8.1L Engines)  .
  12. Install the exhaust manifold pipe, if necessary. Refer to Exhaust Manifold Pipe Replacement (6.0L, 6.6L & 8.1L Engines) .
scientia non olet · About LEMON Manuals