LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Prizm Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics - 1.8L >> System Tests >> Mil On Steady >> Diagnostic Procedures

Diagnostic Procedures

  1. Did you perform the Diagnostic System Check - Engine Controls? If yes, go to next step. If no, see DIAGNOSTIC SYSTEM CHECK - ENGINE CONTROLS  under SELF-DIAGNOSTIC SYSTEM.
  2. Turn OFF ignition. Disconnect PCM. Turn ON ignition, leaving engine OFF. Is MIL illuminated? If yes, go to next step. If yes, go to step  5 .
  3. Check for a short to ground in the MIL control circuit between PCM and IPC assembly. Repair as necessary. Was a repair necessary? If yes, go to step  6 . If no, go to next step.
  4. Replace PCM. Perform PCM relearn procedure. See POWERTRAIN CONTROL MODULE  under PROGRAMMING. After replacing PCM, go to next step.
  5. Start engine and observe MIL. Does the MIL turn OFF in about 1-2 seconds after engine is started? If yes, go to next step. If no, go to step  2 .
  6. With scan tool, observe the stored information, Capture Info. Does scan tool display any DTCs that you have not diagnosed? If yes, see DIAGNOSTIC TROUBLE CODE DEFINITIONS  . If no, system is okay.
scientia non olet · About LEMON Manuals