Fastener Tightening Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Engine Oil Pressure Sensor | 13 N.m | 9 lb ft |
| Front Floor Rear Console Bolts | 15 N.m | 11 lb ft |
| Fuel/Rear Compartment Release Handle Housing Mounting Bolt | 10 N.m | 89 lb in |
| Ground Wire Bolts that attach to the l/P Center Support Braces | 6 N.m | 53 lb in |
| Instrument Panel Center Support Brace Nuts and Bolts | 20 N.m | 15 lb ft |
| Instrument Panel Compartment Bolts | 15 N.m | 11 lb ft |
| Instrument Panel Compartment Reinforcement Bolts | 20 N.m | 15 lb ft |
| Instrument Panel Reinforcement at Hinge Pillar Nuts and Bolts | 28 N.m | 21 lb ft |
| l/P Drivers Knee Bolster Reinforcement Bolts | 10 N.m | 89 lb in |
| l/P Drivers Knee Bolster Trim Bolts | 10 N.m | 89 lb in |
| l/P Lamp Dimmer Switch Nut | 5.4 N.m | 48 lb in |
| Powertrain Control Module Mounting Bolts | 15 N.m | 11 lb ft |