Removal Procedure
CAUTION:
If a window is cracked but still Intact, crisscross the window with masking tape In order to reduce the risk of damage or personal injury.
Important: Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces and inner trim of the window.
- Remove the rear quarter upper trim.
- Remove the rear quarter lower trim.
Important: Keep the cutting edge of the tool against the window. Do this from inside the vehicle to protect the outer painted surface.
- This will allow the urethane adhesive to be separated from the window.
- Leave a base of urethane on the pinch-weld flange.
- The only suitable lubrication is clear water.
- Use J 39032 or equivalent in order to remove the window.
- Remove the quarter modular window from the pinch-weld flange.