LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Malibu LS >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal & Installation, Overhaul >> Ignition Systems >> Ignition Control Module >> Removal & Installation (3.1L & 3.4L)

Removal & Installation (3.1L & 3.4L)

  1. Disconnect ignition control module harness connectors. See Figure . Disconnect spark plug wires from the ignition coil(s). Note the position from which the wires are removed. Remove screws securing the ignition coils to the ignition control module.
  2. Remove the ignition coils. Remove the ignition control module from the bracket. To install, reverse removal procedure. Tighten ignition coil screws to specification. See TORQUE SPECIFICATIONS  . Reconnect spark plug wires. See Figure .
scientia non olet · About LEMON Manuals