LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Malibu LS >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal & Installation, Overhaul >> Fuel Systems >> Idle Air Control Valve >> Installation

Idle Air Control Valve: Installation

  1. Lubricate the IAC valve seal with clean engine oil. Install the IAC valve into the throttle body. Install a new IAC valve screw and tighten to specification. See TORQUE SPECIFICATIONS  .
  2. Connect the IAC valve harness connector. Install air cleaner outlet resonator, air cleaner intake duct and vent hose. Reset the IAC valve pintle using the following procedure: Turn ignition on, with the engine off. Turn ignition off for 10 seconds. Start the engine and check for proper idle operation.
scientia non olet · About LEMON Manuals