LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Malibu LS >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Switch Replacement - Power >> Installation Procedure

Installation Procedure

  1. Connect the electrical connector to the power seat switch.
    Fig 1: Installing Power Seat Switch
    G01780569Courtesy of GENERAL MOTORS CORP.
  2. Position the power seat switch to the seat cushion frame.
    CAUTION: Refer to FASTENER NOTICE .
  3. Install the power seat switch screws.

    Tighten 

    Tighten the screws to 3 N.m (27 lb in).

    Fig 2: Installing Power Seat Switch Screws
    G01780570Courtesy of GENERAL MOTORS CORP.
  4. Adjust the front seat cushion cover. Refer to Seat Cushion Cover Replacement - Front .
  5. Align the bezel to the power seat switch and press into place until fully seated.
  6. Adjust the front bucket seat to the original position.
    Fig 3: Installing Power Seat Switch Bezel
    G01780571Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals