LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Malibu LS >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System And Washer System >> Repair Instructions >> Washer Solvent Container Level Sensor Replacement >> Installation Procedure

Installation Procedure

  1. Position the seal to the washer solvent container pressing in until fully seated.
  2. Position the washer solvent container level sensor to the washer solvent container pressing in until fully seated.
    Fig 1: Installing Washer Solvent Container Level Sensor
    G01779717Courtesy of GENERAL MOTORS CORP.
  3. Connect the washer solvent container level sensor electrical connector.
  4. install the left front fender liner. Refer to FRONT FENDER LINER REPLACEMENT .
  5. Fill the washer solvent container with washer solvent.
    Fig 2: Connecting Washer Solvent Container Level Sensor Electrical Connector
    G01779718Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals