LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Malibu Base >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Child Restraint Tether Anchor Replacement >> Installation Procedure

Installation Procedure

  1. Install the tether anchor bracket to the rear self.
    CAUTION: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the tether anchor bolt.

    Tighten 

    Tighten the tether anchor bolt to 20 N.m (15 lb ft).

  3. Install the tether bezel to the rear self.
    Fig 1: Installing Child Restraint Tether Anchor
    G01780888Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals