Installation Procedure
WARNING: This page is about a different car, the 2003 Chevrolet Monte Carlo and 2003 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
- Position the hood to the vehicle, with an assistant.
- Align the hood hinges to the alignment marks on the hood.
- Install the hood hinge to hood bolts.
Tighten: Tighten the hood hinge to hood bolts to 25 N.m (18 lb ft).
- Install the hood assist rods. Refer to Assist Rod Replacement - Hood .
- Adjust the hood. Refer to Hood Adjustment .
NOTE:
Refer to Fastener Notice
in Cautions and Notices.