Hood Adjustment: Notes
WARNING: This page is about a different car, the 2003 Chevrolet Monte Carlo and 2003 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
The hood hinges are bolted to the fender and the hood. Fore-aft adjustment may be made by elongating the hood-side hinge holes. Vertical adjustment at the front may be made by adjusting the hood bumpers up or down. Gap tolerances are 2-6 mm (0.08-0.22 in) and flush tolerances are 0-2 mm (0-0.08 in).