Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Monte Carlo and 2003 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Sunshade

Courtesy of GENERAL MOTORS CORP.

Connect the electrical to the sunshade connector if equipped.
Position the sunshade to the mounting point at the roof.
Position the sunshade just behind the sunshade anchor.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the sunshade screws.
Tighten: Tighten the sunshade screws to 2 N.m (18 lb in).
Position the sunshade into the sunshade anchor.