LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Impala LS >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Servicing >> Removal & Installation >> TFP Manual Valve Position Switch >> Installation

TFP Manual Valve Position Switch: Installation

NOTE: When installing the TFP switch handle the switch carefully, the fluid pressure manual valve position switch is very delicate.
  1. Carefully install the fluid pressure manual valve position switch (395). See Figure . Install the control valve body bolts (375, 379, 381) that mount the fluid pressure manual valve position switch to the control valve body (300).
  2. Tighten the control valve body bolt (375) to 106 INCH lbs. (12 N.m). Tighten the control valve body bolt (379) to 106 INCH lbs. (16 N.m).
  3. Tighten the control valve body bolt (381) to 70 INCH lbs. (8 N.m). Connect the transaxle wiring harness. Install the case side cover. See CASE SIDE COVER  .
scientia non olet · About LEMON Manuals