LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Impala LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 562 (Body Front End) >> Repair Instructions >> Fender Sound Insulator Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Monte Carlo and 2003 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: The front fender insulator must be kept near the flange of the front fender wheel opening to avoid interference with the front door edge.
    Fig 1: Front Fender Insulator
    GM456680Courtesy of GENERAL MOTORS CORP.
  1. Install the front fender insulator to the inner fender.
  2. Fig 2: Front Fender Insulator Tab
    GM456677Courtesy of GENERAL MOTORS CORP.
  3. Install the front fender insulator tab to the under fender mounting bracket.
  4. Fig 3: Front Fender Insulator Nut
    GM456674Courtesy of GENERAL MOTORS CORP.
  5. Install the nut to the stud by pressing on until fully seated
  6. Install the front fender liner. Refer to Front Fender Liner Replacement .