LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Impala LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 540 (Lighting Systems) >> Repair Instructions >> Headlamp Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet Monte Carlo and 2003 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Headlamp Switch
    GM575129Courtesy of GENERAL MOTORS CORP.
  1. Install the foglamp switch to the headlamp switch housing, pressing into place until fully seated.
  2. Connect the electrical connector to the headlamp switch.
  3. Connect the electrical connector to the foglamp switch.
  4. Install the headlamp housing switch to the instrument panel.
  5. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  6. Install the screws to the headlamp housing switch.

    Tighten:  Tighten the headlamp housing switch screws to 2 N.m (18 lb in).

  7. Install the instrument panel cluster trim plate bezel. Refer to Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Impala) or Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Monte Carlo) in Instrument Panel, Gages and Console.