LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Impala LS >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Repair Instructions >> Wheel Speed Sensor Replacement - Rear >> Installation Procedure

Installation Procedure

  1. Install the hub and bearing assembly (1) to the vehicle.
  2. Connect the electrical connector to the rear wheel speed sensor.
  3. Install the wheel and tire assembly.
  4. Lower the vehicle.
  5. Turn the ignition switch to the ON position, with the engine off.
  6. Perform the Diagnostic System Check - ABS .
scientia non olet · About LEMON Manuals