LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Impala LS >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Remote Keyless Entry System >> Removal & Installation >> Remote Control Door Lock Receiver >> Removal (Impala)

Removal (Impala)

    NOTE: If upper side rail clip retainers are damaged during removal of windshield pillar garnish molding, replace retainer.
  1. Remove windshield pillar garnish molding from clip retainers on upper side rail. See Figure . Slide roof leg of windshield pillar garnish molding out from under center pillar trim panel. Remove windshield pillar garnish molding from windshield pillar. Remove windshield pillar garnish molding from front door carpet retainer by pulling up and back. Remove windshield pillar garnish molding.
  2. Starting at right side of windshield, carefully lift upwards on defroster grille in order to release retainers. See Figure . Continue working to left until all of retainers are released. Disconnect Daytime Running Lights (DRL) sensor from defroster grille. See Figure . Remove defroster grille.
  3. Disengage Remote Control Door Lock Receiver (RCDLR) retainers. Disconnect RCDLR electrical connectors. Remove RCDLR. See Figure .
scientia non olet · About LEMON Manuals