LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Impala LS >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System And Washer System >> Repair Instructions >> Wiper Drive System Module Replacement >> Installation Procedure

Installation Procedure

  1. Position the wiper drive system module to the vehicle.
  2. Connect the wiper motor electrical connector.
  3. Install the wiper drive system screws. Tighten the screws to 10 N.m (89 lb in).
  4. Using the J 39529  , Install the wiper transmission to the wiper motor crank arm.
  5. Install the wiper motor water deflector.
  6. Install the air inlet grille panel.
  7. Inspect the wipers for proper operation.