LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Impala Base, 3.8 K >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Exhaust Hanger Mounting Bracket Replacement >> Installation Procedure

Installation Procedure

  1. Install the exhaust muffler rear hanger brackets.
  2. Install the rear bumper impact bar bolts. Tighten the bolts to 25 N.m (18.4 ft lbs).
  3. Install the exhaust pipe rear hanger insulators to the muffler and the rear hanger bracket.
  4. Install the exhaust pipe hanger bracket.
  5. Install the exhaust pipe hanger bolt. Tighten the bolt to 25 N.m (18.4 ft lbs).
  6. Install the exhaust pipe rear hanger insulator to the exhaust pipe hanger bracket.
  7. Remove the support from the exhaust system.
  8. Inspect the exhaust system for underbody contact.
  9. Lower the vehicle.
scientia non olet · About LEMON Manuals