LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Steering >> Power Steering >> Power Rack & Pinion Steering System >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Adjuster Plug Lock Nut 50 (68)
Crossmember Bolts 81 (110)
Inner Tie Rod-To-Rack (1) 74 (100)
Pinion & Valve Assembly Lock Nut 26 (35)
Power Steering Pump Mounting Bolts 18 (25)
Pressure Line Fitting (Hydraulic Union) 20 (27)
Rack & Pinion Mounting Bolt/Nuts (1) 74 (100)
Steering Shaft Lower Coupling Pinch Bolt 35 (47)
Tie Rod Adjusting Hex Lock Nut 44 (60)
Tie Rod End Castle Nut (2)
Transmission Mounting Nut ("F" Body) 37 (50)
Wheel Lug Nuts 100 (136)
(1) Apply Loctite (GM 1052624) to bolt threads. Tighten bolts in sequence.
(2) To align cotter pin holes, tighten nut a minimum of 35 ft. lbs. (47 N.m) and a maximum of 52 ft. lbs. (71 N.m). DO NOT back off nut to align cotter pin holes.