Removal Procedure

Important:  If you must remove more than one tube adapter at one time, stamp the BPMV with a number (1, 2 or 3) in order to indicate the number of grooves cut into the tube adapters. This procedure will aid proper reassembly.

1. Raise the vehicle and properly support.
2. Remove the three EHCU shield bolts and shield.
   Fig 1: Removing EHCU Shield Bolts & Shield

   Courtesy of GENERAL MOTORS CORP.
3. Remove the appropriate brake line from the tube adapter.
4. Remove the tube adapter (1).
   Fig 2: Removing Tube Adapter

   Courtesy of GENERAL MOTORS CORP.