Fastener Tightening Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Auxiliary Battery Hold Down Retaining Bolt | 25 N.m | 18 lb ft |
| Auxiliary Battery Tray Retaining Bolts | 25 N.m | 18 lb ft |
| Auxiliary Generator Brace Mounting (Long) Bolts | 50 N.m | 37 lb ft |
| Auxiliary Generator Brace Mounting (Short) Bolts | 25 N.m | 18 lb ft |
| Auxiliary Positive and Negative Battery Cable Retaining Bolts to the Battery | 15 N.m | 11 lb ft |
| Battery Negative Cable Lead to Engine Block Bolt | 25 N.m | 18 lb ft |
| Battery Negative Cable Lead to Inner Fender Well Bolt | 10 N.m | 89 lb in |
| Battery Negative/ Positive Terminal Bolts | 17 N.m | 13 lb ft |
| Front Battery Hold Down Retaining Bolt | 25 N.m | 18 lb ft |
| Front Battery Tray Retaining Bolts | 25 N.m | 18 lb ft |
| Generator Brace to the Generator Bracket Retaining Bolts (4.3L, 5.0L and 5.7L) | 50 N.m | 37 lb ft |
| Generator Bracket Mounting Bolts and Nuts (4.3L, 5.0L and 5.7L) | 41 N.m | 30 lb ft |
| Generator Bracket Mounting Bolts and Nuts (8.1 L) | 50 N.m | 37 lb ft |
| Generator Bracket Mounting Bolts and Nuts (6.5L Diesel) | 50 N.m | 37 lb ft |
| Generator Front Mounting Bolts (6.5L) | 50 N.m | 37 lb ft |
| Generator Output (Bat) Terminal Nut | 18 N.m | 13 lb ft |
| Generator Pulley Retaining Nut | 75 N.m | 55 lb ft |
| Generator Rear Mounting Bolts (6.5L) | 25 N.m | 18 lb ft |
| Ignition Wire Harness to the Starter Motor Solenoid (Diesel Engines) | 6 N.m | 53 lb in |
| Ignition Wire Harness to the Starter Motor Solenoid (Gas Engines) | 2 N.m | 18 lb in |
| Oil Fill Tube Screws | 5 N.m | 44 lb in |
| Oil Fill Tube Support Bracket Bolt | 25 N.m | 18 lb ft |
| Positive Battery Cable Lead to Junction Block Retaining Nut | 10 N.m | 89 lb in |
| Positive Battery Cable to the Starter Motor Solenoid (Diesel Engines) | 16 N.m | 12 lb ft |
| Positive Battery Cable to the Starter Motor Solenoid (Gas Engines) | 10 N.m | 89 lb in |
| Starter Motor Bracket Bolt to the Engine (Diesel Engines) | 17 N.m | 13 lb ft |
| Starter Motor Field Lead Retaining Nut | 11 N.m | 97 lb in |
| Starter Motor Heat Shield Retaining Bolts | 3 N.m | 27 lb in |
| Starter Motor Heat Shield Retaining Nuts | 6 N.m | 53 lb in |
| Starter Motor Retaining Bolts to the Engine | 45 N.m | 33 lb ft |
| Starter Motor Retaining Nut to the Engine Bracket (Diesel Engines) | 10 N.m | 89 lb in |