LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Cavalier Base, 4D Sedan, 2.2 F >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Replacement >> Installation Procedure

Installation Procedure

  1. Install the seat to the vehicle.
  2. Connect the seat belt wire harness on the driver's side.
  3. Position the seat fully forward to gain access to the seat adjuster rear nuts (3).
  4. Install the front bucket seat rear adjuster nuts (3). Hand tighten the nuts.
  5. Adjust the seat fully rearward.
  6. Verify both lock bars are engaged in the most forward adjustment in the same notch on both of the seat adjusters.
  7. Install the front bucket seat front adjuster nuts (3). Tighten the nuts to 20 N.m (21 ft lbs).
  8. Adjust the front bucket seat to the full forward position and tighten the rear adjuster nuts. Tighten the nuts to 20 N.m (21 ft lbs).
  9. Install the seat adjuster stud covers (2).
scientia non olet · About LEMON Manuals