LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Cavalier Base, 2D Coupe, Standard >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Child Restraint Tether Anchor Replacement >> Installation Procedure

Installation Procedure

  1. Position the child tether anchor tab to the alignment hole in the rear shelf.

    Important:  DO NOT use power tools to tighten the child tether anchor bolts.

  2. Install the child tether anchor bolt to the anchor. Tighten the bolt to 20 N.m (15 ft lbs).
  3. Close the child tether anchor bezel pressing into place until fully seated.
scientia non olet · About LEMON Manuals